Print settings
| Material | Any |
|---|---|
| Layer height | 0.2 mm |
| Infill | 100% |
| Supports | Not needed — prints flat as oriented |
| Filament | ≈ 1 g total (estimate) |
| Size · first-layer-test-squares | 170 × 170 × 0.2 mm |
Hardware
None
FIT CHECK
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
License
Original design by MakerCore Hub, free for personal and educational use under CC BY-NC 4.0. Remix it and share it with credit; contact us for commercial use.
Missions that use it
From STL to Print: Slicing Basics for Makers
Download a free model from our 3D Print Vault, slice it with free software and get a clean first print.
RecruitUpgrade Your 3D Printer to Klipper with MainsailOS
Faster, smoother prints with input shaping and pressure advance, controlled from a modern web UI.
EngineerOctoPrint: Control and Watch Your 3D Printer Remotely
Upload files, start prints and watch a live camera from any browser in the house.
Recruit
