Print settings
| Material | PLA / PETG |
|---|---|
| Layer height | 0.2 mm |
| Infill | 20% |
| Supports | Not needed — prints flat as oriented |
| Filament | ≈ 5 g total (estimate) |
| Size · pi-zero-base-plate | 75 × 40 × 6.5 mm |
Hardware
4× M2.5 × 5 mm screws
FIT CHECK
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
License
Original design by MakerCore Hub, free for personal and educational use under CC BY-NC 4.0. Remix it and share it with credit; contact us for commercial use.
Missions that use it
Pi Zero Drone Camera and GPS Flight Logger
Record 1080p video automatically on power-up and log your GPS track for mapping later.
EngineerPi-hole: Block Ads and Trackers on Your Whole Network
A tiny DNS server that filters ads for every phone, TV and laptop in the house.
RecruitWildlife Trail Camera with PIR Trigger
Capture animals in your yard with a motion-triggered, battery-powered camera.
Technician
