Print settings
| Material | PETG / PLA (black, matte) |
|---|---|
| Layer height | 0.2 mm |
| Infill | 20% |
| Supports | Not needed — prints flat as oriented |
| Filament | ≈ 5 g total (estimate) |
| Size · window-camera-anti-glare-hood | 44 × 44 × 18 mm |
Hardware
4× M2 × 6 mm screws · VHB / double-sided foam tape for the flange
FIT CHECK
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
License
Original design by MakerCore Hub, free for personal and educational use under CC BY-NC 4.0. Remix it and share it with credit; contact us for commercial use.
Missions that use it
Sky and Storm Time-Lapse Camera
Capture clouds, sunsets and storms every few seconds and render a smooth video.
RecruitIdentify Birds by Their Songs with BirdNET
A 24/7 listening station that names the bird species singing in your yard.
TechnicianDriveway Car Alert with Frigate Zones
Get a phone alert only when a car actually pulls into your driveway — not for every car passing on the street.
Engineer
