Print settings
| Material | PLA / PETG |
|---|---|
| Layer height | 0.2 mm |
| Infill | 20% |
| Supports | Not needed — prints flat as oriented |
| Filament | ≈ 27 g total (estimate) |
| Size · pi-4-5-keyhole-wall-plate | 105 × 80 × 10 mm |
Hardware
2× #6/#8 or 3.5–4 mm wall screws (head ≤ 8.5 mm) + anchors · 4× M2.5 × 6 mm for the Pi
FIT CHECK
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
License
Original design by MakerCore Hub, free for personal and educational use under CC BY-NC 4.0. Remix it and share it with credit; contact us for commercial use.
Missions that use it
Pi-hole: Block Ads and Trackers on Your Whole Network
A tiny DNS server that filters ads for every phone, TV and laptop in the house.
RecruitHome Assistant on Raspberry Pi 5: Your Smart Home Brain
Install Home Assistant OS and control lights, plugs and sensors locally — no cloud required.
RecruitInternet Speed and Outage Logger
Measure your connection every hour and log every outage — real evidence when you call your internet provider.
Recruit
