Print settings
| Material | PLA / PETG |
|---|---|
| Layer height | 0.2 mm |
| Infill | 20% |
| Supports | Not needed — prints flat as oriented |
| Filament | ≈ 16 g total (estimate) |
| Size · pi-cluster-stack-plate | 104 × 80 × 8 mm |
| Size · pi-cluster-hex-spacer-30mm | 9 × 7.8 × 30 mm |
Hardware
Per level: 1 plate + 4 spacers · 4× M3 threaded rods + nuts · 4× M2.5 × 6 mm per Pi
FIT CHECK
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
License
Original design by MakerCore Hub, free for personal and educational use under CC BY-NC 4.0. Remix it and share it with credit; contact us for commercial use.
Missions that use it
Docker on Raspberry Pi: Your First Containers
Install Docker, run Uptime Kuma to watch your websites and devices, and learn the self-hosting workflow.
TechnicianHome NAS and Jellyfin Media Server
Share files across the house with Samba and stream your own movies and music with Jellyfin.
TechnicianSelf-Hosted Git Server with Gitea
Keep your code, configs and project files in private repositories on your own Pi, with a web interface, issues and pull requests.
Technician
