Print settings
| Material | PLA |
|---|---|
| Layer height | 0.2 mm |
| Infill | 15% |
| Supports | Not needed — prints flat as oriented |
| Filament | ≈ 27 g total (estimate) |
| Size · pi-breadboard-lab-plate | 185 × 68 × 8 mm |
Hardware
4× M2.5 × 6 mm screws · breadboard sticks in with its own adhesive
FIT CHECK
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
License
Original design by MakerCore Hub, free for personal and educational use under CC BY-NC 4.0. Remix it and share it with credit; contact us for commercial use.
Missions that use it
Your First Breadboard Circuit: Light an LED
Learn how a breadboard is wired inside and build a safe LED circuit from the Pi's pins.
TechnicianPython + GPIO: Blink an LED and Read a Button
Write your first hardware program with the gpiozero library — outputs, inputs and events.
TechnicianI2C Sensors: Read Temperature, Humidity and Pressure
Enable I2C, detect a BME280 sensor and read live data with Python.
Technician
