Print settings
| Material | PLA / PETG |
|---|---|
| Layer height | 0.2 mm |
| Infill | 20% |
| Supports | Not needed — prints flat as oriented |
| Filament | ≈ 13 g total (estimate) |
| Size · pi-4-5-case-30mm-fan-lid | 90.4 × 61.4 × 22 mm |
Hardware
30 × 30 × 7 mm 5 V fan · 4× M3 × 12 mm screws + nuts (or M2.5 self-tappers into the fan frame) · base and 4× M2.5 × 12 mm screws from the vented case
FIT CHECK
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
License
Original design by MakerCore Hub, free for personal and educational use under CC BY-NC 4.0. Remix it and share it with credit; contact us for commercial use.
Missions that use it
Run a Local AI Chatbot on Raspberry Pi 5 with Ollama
Chat with small open language models fully offline — no account, no cloud.
TechnicianReal-Time Object Detection with the Raspberry Pi AI HAT+
Detect people, cars, pets and dozens of objects at high frame rates with a Hailo accelerator.
EngineerHome NAS and Jellyfin Media Server
Share files across the house with Samba and stream your own movies and music with Jellyfin.
Technician
