Print settings
| Material | PETG / TPU |
|---|---|
| Layer height | 0.16 mm |
| Infill | 40% |
| Supports | Not needed — prints flat as oriented |
| Filament | ≈ 2 g total (estimate) |
| Size · pi-camera-mount-gopro-style | 30 × 43.5 × 15 mm |
Hardware
4× M2 × 4 mm screws · 1× M5 bolt for the tab
FIT CHECK
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
License
Original design by MakerCore Hub, free for personal and educational use under CC BY-NC 4.0. Remix it and share it with credit; contact us for commercial use.
Missions that use it
Motion-Alert Camera That Sends Photos to Your Phone
Detect motion with Picamera2 and OpenCV, save snapshots and push instant notifications.
TechnicianDIY Smart Doorbell with Camera Snapshot
Press the button, get a photo of the visitor on your phone and a chime inside.
TechnicianPi Zero Drone Camera and GPS Flight Logger
Record 1080p video automatically on power-up and log your GPS track for mapping later.
Engineer
