Print settings
| Material | PETG / PLA |
|---|---|
| Layer height | 0.2 mm |
| Infill | 20% |
| Supports | Not needed — prints flat as oriented |
| Filament | ≈ 86 g total (estimate) |
| Size · helping-hands-weighted-base | 110 × 95.3 × 24 mm |
| Size · helping-hands-socket-lid | 93.8 × 81.2 × 27 mm |
Hardware
3× M3 × 10 mm countersunk screws (self-tap) · 4× M3 × 8 mm screws + 4× M3 nuts · ~400 g of weight · 6 mm arms
FIT CHECK
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
License
Original design by MakerCore Hub, free for personal and educational use under CC BY-NC 4.0. Remix it and share it with credit; contact us for commercial use.
