Print settings
| Material | PLA / PETG |
|---|---|
| Layer height | 0.2 mm |
| Infill | 20% |
| Supports | Not needed — prints flat as oriented |
| Filament | ≈ 28 g total (estimate) |
| Size · full-breadboard-tray-with-comb | 170.3 × 69.8 × 14 mm |
Hardware
4 stick-on bumper feet (10 mm)
FIT CHECK
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
License
Original design by MakerCore Hub, free for personal and educational use under CC BY-NC 4.0. Remix it and share it with credit; contact us for commercial use.
Missions that use it
Your First Breadboard Circuit: Light an LED
Learn how a breadboard is wired inside and build a safe LED circuit from the Pi's pins.
TechnicianPython + GPIO: Blink an LED and Read a Button
Write your first hardware program with the gpiozero library — outputs, inputs and events.
TechnicianElectronics Basics: Voltage, Current and Resistance
Ohm's law in plain language, plus the three rules that keep your Pi alive.
Technician
