Print settings
| Material | PLA / PETG |
|---|---|
| Layer height | 0.2 mm |
| Infill | 20% |
| Supports | Not needed — prints flat as oriented |
| Filament | ≈ 22 g total (estimate) |
| Size · angled-display-stand-bracket | 110 × 73.7 × 20 mm |
Hardware
None · optional foam tape or rubber feet
FIT CHECK
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
License
Original design by MakerCore Hub, free for personal and educational use under CC BY-NC 4.0. Remix it and share it with credit; contact us for commercial use.
Missions that use it
Portable Retro Console with a 7-Inch Touchscreen
Mount a Pi behind a touchscreen, add a battery and a controller and game anywhere.
TechnicianFamily Check-In Board with RFID Tags and a Touchscreen
Tap your key-ring tag by the door and the screen shows who is home and who is out — no phone tracking needed.
TechnicianSmart Mirror with MagicMirror²
Time, weather, calendar and news glowing through a mirror — open-source software behind two-way acrylic.
Technician
