// Wind Vane (608 Bearing)
// Original design. Free to print for personal and educational use (CC BY-NC 4.0).
// Units: millimetres. Edit the numbers below and press F6 in OpenSCAD to re-render.

// Generated from the same geometry as wind-vane-608.stl

difference() {
  union() {
    hull() {
      translate([-55,0,0])
        cylinder(d=8, h=6, $fn=48);
      translate([108,0,0])
        cylinder(d=8, h=6, $fn=48);
    }
    cylinder(d=34, h=14, $fn=96);
    hull() {
      translate([50,-1.2,0])
        cube([60,2.4,6]);
      translate([92,-1.2,64])
        cube([18,2.4,0.01]);
    }
    union() {
      translate([-55,0,0])
        cylinder(d=26, h=16, $fn=48);
      hull() {
        translate([-55,0,0])
          cylinder(d=12, h=6, $fn=48);
        translate([-80,0,0])
          cylinder(d=1.6, h=6, $fn=48);
      }
      hull() {
        translate([-67,-10,0])
          cube([0.01,20,6]);
        translate([-80,0,0])
          cylinder(d=1.6, h=6, $fn=48);
      }
    }
  }
  translate([0,0,6.8])
    cylinder(d=22.15, h=7.2, $fn=96);
  translate([0,0,-1])
    cylinder(d=14, h=16, $fn=48);
  translate([-55,0,2.6])
    cylinder(d=15.36, h=14, $fn=6);
  translate([13.5,0,-0.01])
    cylinder(d=6.2, h=3.2, $fn=48);
}