// Raspberry Pi 4/5 DIN Rail Mount
// Original design. Free to print for personal and educational use (CC BY-NC 4.0).
// Units: millimetres. Edit the numbers below and press F6 in OpenSCAD to re-render.

// Generated from the same geometry as pi-4-5-din-rail-plate.stl

difference() {
  difference() {
    union() {
      hull() {
        translate([4,4,0])
          cylinder(d=8, h=3, $fn=48);
        translate([4,64,0])
          cylinder(d=8, h=3, $fn=48);
        translate([93,4,0])
          cylinder(d=8, h=3, $fn=48);
        translate([93,64,0])
          cylinder(d=8, h=3, $fn=48);
      }
      translate([9.5,9.5,2.99])
        cylinder(d=6, h=5.01, $fn=40);
      translate([67.5,9.5,2.99])
        cylinder(d=6, h=5.01, $fn=40);
      translate([9.5,58.5,2.99])
        cylinder(d=6, h=5.01, $fn=40);
      translate([67.5,58.5,2.99])
        cylinder(d=6, h=5.01, $fn=40);
    }
    translate([9.5,9.5,-1])
      cylinder(d=2.2, h=20, $fn=40);
    translate([67.5,9.5,-1])
      cylinder(d=2.2, h=20, $fn=40);
    translate([9.5,58.5,-1])
      cylinder(d=2.2, h=20, $fn=40);
    translate([67.5,58.5,-1])
      cylinder(d=2.2, h=20, $fn=40);
    translate([48.5,26.5,-1])
      cylinder(d=3.4, h=6, $fn=48);
    translate([48.5,41.5,-1])
      cylinder(d=3.4, h=6, $fn=48);
  }
  translate([15,18,-1])
    hull() {
      cylinder(d=3, h=5, $fn=48);
      translate([18,0,0])
        cylinder(d=3, h=5, $fn=48);
    }
  translate([15,26,-1])
    hull() {
      cylinder(d=3, h=5, $fn=48);
      translate([18,0,0])
        cylinder(d=3, h=5, $fn=48);
    }
  translate([15,34,-1])
    hull() {
      cylinder(d=3, h=5, $fn=48);
      translate([18,0,0])
        cylinder(d=3, h=5, $fn=48);
    }
  translate([15,42,-1])
    hull() {
      cylinder(d=3, h=5, $fn=48);
      translate([18,0,0])
        cylinder(d=3, h=5, $fn=48);
    }
  translate([64,18,-1])
    hull() {
      cylinder(d=3, h=5, $fn=48);
      translate([18,0,0])
        cylinder(d=3, h=5, $fn=48);
    }
  translate([64,26,-1])
    hull() {
      cylinder(d=3, h=5, $fn=48);
      translate([18,0,0])
        cylinder(d=3, h=5, $fn=48);
    }
  translate([64,34,-1])
    hull() {
      cylinder(d=3, h=5, $fn=48);
      translate([18,0,0])
        cylinder(d=3, h=5, $fn=48);
    }
  translate([64,42,-1])
    hull() {
      cylinder(d=3, h=5, $fn=48);
      translate([18,0,0])
        cylinder(d=3, h=5, $fn=48);
    }
}