Print settings
| Material | PLA / PETG |
|---|---|
| Layer height | 0.16 mm |
| Infill | 20% |
| Supports | Not needed — prints flat as oriented |
| Filament | ≈ 4 g total (estimate) |
| Size · pico-case-base | 25.8 × 55.8 × 4.6 mm |
| Size · pico-case-lid | 25.8 × 55.8 × 8 mm |
Hardware
4× M2 × 8 mm screws (from below into the lid posts)
FIT CHECK
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
Printers vary. If holes are tight, drill them out or add 0.2 mm in the .scad file. Board dimensions follow the makers' published drawings; check yours before a long print.
License
Original design by MakerCore Hub, free for personal and educational use under CC BY-NC 4.0. Remix it and share it with credit; contact us for commercial use.
Missions that use it
Microcontrollers: MicroPython on the Raspberry Pi Pico 2 W
Flash MicroPython, blink the onboard LED and read an analog sensor on a $7 board.
EngineerReaction-Time Game: Your First Pico Project
An LED lights up at a random moment — press the button as fast as you can and see your reaction time in milliseconds.
RecruitCustom Macro Keypad with Raspberry Pi Pico
One-press shortcuts for streaming, editing and coding, using CircuitPython USB keyboard support.
Technician
